The Easy Change System changes your lift arms to a hook system, allowing you to hook your
tractor to an implement without leaving your seat. No other quick hitch gives you this much
flexibility for all of your implements. Fits Category 1 (up to 75 hp) and Category 2 Tractors (up to
150 hp) Cat 2 size just $10 more!
Add to the versatility of the Easy Change system by adding a Hydraulic Top Link.
|1. Lower your lift arms and back
into the implement
|2. Use the bumper on the Easy
Change System to place the
|3. Raise your lift arms and the
spring loaded latch will open and
lock onto the implement pins.
POSITIVE ASPECTS OF THE SYSTEM
The Easy Change System is all that is needed to attach your tractor to all your implements
without having to lift and move heavy implements into position for attachment.
WHAT IT DOES AND HOW IT IS USED
It changes your lift arms to a hook system, which allows you to hook the lift arms to a piece of
equipment while you remain on the tractor.
HOW TO INSTALL IT ON TO A TRACTOR
It fits over the end of your lift arm (attached by a pin through the ball and a u-bolt for stability).
Everything needed to install on a tractor is included in the set.
HOW IT WORKS
With the arms down and the hook open, you back into the implement and raise the lift arms to
hook the pins on the implement. Then you will need to close the latch, attach the 3rd arm, and
attach a PTO if needed.
|Optional Stabilizer Bar
holds the lift arms at
Attaches easily to hitches
within seconds. Bar can
be marked with